Comments for Looking Out For Number One http://www.lookingoutfornumberone.com The Keith Rowland Blog Tue, 26 Jan 2010 17:09:13 +0000 http://wordpress.org/?v=2.9.2 hourly 1 Comment on Making Your Own JoliCloud Prism Web Application by MYstIC G http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-2/#comment-593 MYstIC G Tue, 26 Jan 2010 17:09:13 +0000 http://www.keithrowland.com/blog/?p=1643#comment-593 Just installed Jolicloud today and was hoping this was possible. However I would never have figured it out without your article, thank you very much! :D Just installed Jolicloud today and was hoping this was possible. However I would never have figured it out without your article, thank you very much! :D

]]> Comment on Making Your Own JoliCloud Prism Web Application by Tojoko http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-2/#comment-514 Tojoko Thu, 10 Dec 2009 19:50:52 +0000 http://www.keithrowland.com/blog/?p=1643#comment-514 Just wanted to say thanks for these very clear instructions! Just wanted to say thanks for these very clear instructions!

]]> Comment on Making Your Own JoliCloud Prism Web Application by How to Create a Jolicloud Website App with Prism | Linux Netbook Video http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-2/#comment-510 How to Create a Jolicloud Website App with Prism | Linux Netbook Video Sun, 06 Dec 2009 20:28:37 +0000 http://www.keithrowland.com/blog/?p=1643#comment-510 [...] that can be accessed without launching a Web browser. Also check out this written tutorial on making a Jolicloud Prism Web application. Add new comment Home » How to Create a Jolicloud Website App with [...] [...] that can be accessed without launching a Web browser. Also check out this written tutorial on making a Jolicloud Prism Web application. Add new comment Home » How to Create a Jolicloud Website App with [...]

]]> Comment on Reviving Old Computers (PowerBook G4) by Keith http://www.lookingoutfornumberone.com/technology/reviving-old-computers-powerbook-g4/comment-page-1/#comment-462 Keith Sat, 10 Oct 2009 23:33:04 +0000 http://www.keithrowland.com/blog/?p=1626#comment-462 I ordered one that was officially recommended for the PowerBook (it was actually a PC2700 even though only a PC2100 was needed) and it did not register the first time I put it in either. I removed and reinserted very carefully and it finally worked. Seems it is a bit picky about insertion alignment. I ordered one that was officially recommended for the PowerBook (it was actually a PC2700 even though only a PC2100 was needed) and it did not register the first time I put it in either. I removed and reinserted very carefully and it finally worked. Seems it is a bit picky about insertion alignment.

]]> Comment on Reviving Old Computers (PowerBook G4) by John http://www.lookingoutfornumberone.com/technology/reviving-old-computers-powerbook-g4/comment-page-1/#comment-461 John Sat, 10 Oct 2009 21:37:44 +0000 http://www.keithrowland.com/blog/?p=1626#comment-461 How did you get the 12" to read the 1g of ram? I popped a (good) 1g stick of ddr ram in there and it didn't take, says the slot is empty. How did you get the 12″ to read the 1g of ram? I popped a (good) 1g stick of ddr ram in there and it didn’t take, says the slot is empty.

]]> Comment on Making Your Own JoliCloud Prism Web Application by Raf http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-2/#comment-458 Raf Tue, 06 Oct 2009 08:50:03 +0000 http://www.keithrowland.com/blog/?p=1643#comment-458 Can i delete from the desktop??? How can i do??? If i delete it the application does't work anymore. Can i delete from the desktop??? How can i do???
If i delete it the application does’t work anymore.

]]> Comment on Making Your Own JoliCloud Prism Web Application by <fb:name linked="false" useyou="false" uid="734767574">Claire Billault</fb:name> http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-1/#comment-427 Claire Billault Tue, 15 Sep 2009 10:37:46 +0000 http://www.keithrowland.com/blog/?p=1643#comment-427 Thanks a lot for the tip !!! I was waiting for a Mixi ("japanese facebook") Jolicloud app... I no longer need to wait ;D Thanks a lot for the tip !!! I was waiting for a Mixi (“japanese facebook”) Jolicloud app… I no longer need to wait ;D

]]> Comment on Making Your Own JoliCloud Prism Web Application by Nieenden http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-1/#comment-425 Nieenden Mon, 14 Sep 2009 02:23:27 +0000 http://www.keithrowland.com/blog/?p=1643#comment-425 As simple as this was to do it was extremely helpful. You'd think the Jolicloud devs would post this type of info somewhere easy to find. Id be happy to see any more Jolicloud/linux tips you have for a newb like me. As simple as this was to do it was extremely helpful. You’d think the Jolicloud devs would post this type of info somewhere easy to find. Id be happy to see any more Jolicloud/linux tips you have for a newb like me.

]]> Comment on Making Your Own JoliCloud Prism Web Application by hihih http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-1/#comment-405 hihih Fri, 28 Aug 2009 18:34:08 +0000 http://www.keithrowland.com/blog/?p=1643#comment-405 How do you remove the prism shortcut? Once u create it, u can't delete it!!!! How do you remove the prism shortcut? Once u create it, u can’t delete it!!!!

]]> Comment on Making Your Own JoliCloud Prism Web Application by Martin http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-1/#comment-388 Martin Mon, 17 Aug 2009 20:30:47 +0000 http://www.keithrowland.com/blog/?p=1643#comment-388 thanks for this! one note, alt-f2 is "run" to the launcher (and gnome?) no need to run a terminal, just alt-f2, prism, enter. thanks for this! one note, alt-f2 is “run” to the launcher (and gnome?) no need to run a terminal, just alt-f2, prism, enter.

]]> Comment on Making Your Own JoliCloud Prism Web Application by JacopoGio http://www.lookingoutfornumberone.com/technology/making-your-own-jolicloud-prism-web-application/comment-page-1/#comment-385 JacopoGio Sun, 16 Aug 2009 14:13:48 +0000 http://www.keithrowland.com/blog/?p=1643#comment-385 Hi Keith, just a line to let you know that I loved so much this post that I copy/paste it in my own blog dedicated to Jolicloud. You can find here : http://jolicloudexperience.blogspot.com/2009/08/tip-how-to-add-web-appli-to-your.html Best, Jacopo Hi Keith, just a line to let you know that I loved so much this post that I copy/paste it in my own blog dedicated to Jolicloud.

You can find here : http://jolicloudexperience.blogspot.com/2009/08/tip-how-to-add-web-appli-to-your.html

Best,

Jacopo

]]> Comment on Reviving Old Computers (PowerBook G4) by Kit Rosenlund http://www.lookingoutfornumberone.com/technology/reviving-old-computers-powerbook-g4/comment-page-1/#comment-325 Kit Rosenlund Mon, 03 Aug 2009 16:50:16 +0000 http://www.keithrowland.com/blog/?p=1626#comment-325 I liked your article. I recently picked up the 867 MHz "little Al" on Ebay for just over $200. I think it's a great machine. Mine only is running Tiger, but adding an Airport Xtreme card and some more RAM makes it a viable machine today. They get a little warm on the bottom, but not so much as to worry. Long live Apple! -Kit I liked your article. I recently picked up the 867 MHz “little Al” on Ebay for just over $200. I think it’s a great machine. Mine only is running Tiger, but adding an Airport Xtreme card and some more RAM makes it a viable machine today. They get a little warm on the bottom, but not so much as to worry.

Long live Apple!

-Kit

]]> Comment on Reviving Old Computers (PowerBook G4) by Jas http://www.lookingoutfornumberone.com/technology/reviving-old-computers-powerbook-g4/comment-page-1/#comment-309 Jas Thu, 23 Jul 2009 15:22:45 +0000 http://www.keithrowland.com/blog/?p=1626#comment-309 I've got an old eMac in my basement that I keep around for the same reasons. Great old-skool keyboard, and with a gig of RAM it runs Leopard just fine, I must say. That said, I absolutely adore my black Macbook, and while it's far from being obsoleted, I suspect I will be able to continue to use it for web browsing, basic word processing, and all my usual online nonsense for a good long time to come. Certainly well past the day I invest in one of those new iMacs they recently rolled out... I’ve got an old eMac in my basement that I keep around for the same reasons. Great old-skool keyboard, and with a gig of RAM it runs Leopard just fine, I must say.

That said, I absolutely adore my black Macbook, and while it’s far from being obsoleted, I suspect I will be able to continue to use it for web browsing, basic word processing, and all my usual online nonsense for a good long time to come. Certainly well past the day I invest in one of those new iMacs they recently rolled out…

]]> Comment on Linux on $299 eMachines Laptop by Aaron Fisher http://www.lookingoutfornumberone.com/technology/linux-on-299-emachines-laptop/comment-page-1/#comment-267 Aaron Fisher Tue, 30 Jun 2009 23:02:00 +0000 http://www.keithrowland.com/blog/?p=76#comment-267 Hey I just reformatted vista off my eMachines D620-5777 and I've been trying to get Mandrake working on it. However I haven't used linux in years and am trying to get this working, could you email me information on how you got everything working because I've been having alot of problems. I will warn you though, if you tell me you'll help by answering my questions I've got alot, but please help this is the only site I've found with any info on the emd620 and linux. My email is aaronmfisher86@gmail.com if anyone else looking at this site could help as well. Hey I just reformatted vista off my eMachines D620-5777 and I’ve been trying to get Mandrake working on it. However I haven’t used linux in years and am trying to get this working, could you email me information on how you got everything working because I’ve been having alot of problems. I will warn you though, if you tell me you’ll help by answering my questions I’ve got alot, but please help this is the only site I’ve found with any info on the emd620 and linux. My email is aaronmfisher86@gmail.com if anyone else looking at this site could help as well.

]]> Comment on Linux on $299 eMachines Laptop by Keith http://www.lookingoutfornumberone.com/technology/linux-on-299-emachines-laptop/comment-page-1/#comment-259 Keith Fri, 26 Jun 2009 20:59:50 +0000 http://www.keithrowland.com/blog/?p=76#comment-259 Xubuntu is a lower footprint version, it doesn't have the larger full-sized desktop software that regular Ubuntu has. So it runs better on a slower and smaller memory model. But you can add anything that you feel is missing with the software configuration tools. Since the 620 only had 1 GIG of RAM and only a 1.6 GHZ CPU, and I already had Xubuntu downloaded onto a CD for installation on other machines, I used it. I bet regular Ubuntu would run fine. Xubuntu is a lower footprint version, it doesn’t have the larger full-sized desktop software that regular Ubuntu has. So it runs better on a slower and smaller memory model. But you can add anything that you feel is missing with the software configuration tools.

Since the 620 only had 1 GIG of RAM and only a 1.6 GHZ CPU, and I already had Xubuntu downloaded onto a CD for installation on other machines, I used it. I bet regular Ubuntu would run fine.

]]> Comment on Linux on $299 eMachines Laptop by Dan Knezacek http://www.lookingoutfornumberone.com/technology/linux-on-299-emachines-laptop/comment-page-1/#comment-258 Dan Knezacek Fri, 26 Jun 2009 20:52:13 +0000 http://www.keithrowland.com/blog/?p=76#comment-258 Hi, I found your site while looking for peoples experiences with Ubuntu on emachines laptops. I just bought a D620 today with Vista on it. I need it to update the computer in my airplane. I am running Ubuntu on two other machines, but have no experience with laptops. Why did you chose Xubuntu and not Ubuntu? Have you tried to upgrade Ubuntu since installing it? Hi, I found your site while looking for peoples experiences with Ubuntu on emachines laptops. I just bought a D620 today with Vista on it. I need it to update the computer in my airplane. I am running Ubuntu on two other machines, but have no experience with laptops.

Why did you chose Xubuntu and not Ubuntu? Have you tried to upgrade Ubuntu since installing it?

]]> Comment on MI: Selecting a Browser and OS by Patrick Harfst http://www.lookingoutfornumberone.com/technology/mi-selecting-a-browser-and-os/comment-page-1/#comment-160 Patrick Harfst Mon, 27 Apr 2009 04:59:04 +0000 http://www.keithrowland.com/blog/?p=1393#comment-160 Hi Keith, Good thoughts you've got here... Browser wars seem to go on forever, and I (like about 50 million others) wish that one of them would come out on top, with all the best features that the others have, AND be adaptable to all the various sites that one visits in the course of a work day... Am I hopelessly dreaming? Pat Hi Keith,
Good thoughts you’ve got here… Browser wars seem to go on forever, and I (like about 50 million others) wish that one of them would come out on top, with all the best features that the others have, AND be adaptable to all the various sites that one visits in the course of a work day… Am I hopelessly dreaming?
Pat

]]> Comment on LEGO Announces Digital Camera by Keith R http://www.lookingoutfornumberone.com/technology/lego-announces-digital-camera/comment-page-1/#comment-4 Keith R Tue, 13 Jan 2009 10:08:48 +0000 http://www.keithrowland.com/blog/?p=167#comment-4 Anyone could easily construct this mock-up! Anyone could easily construct this mock-up!

]]> Comment on Sony DSC-G3 Camera Has Wi-Fi and Linux by Keith http://www.lookingoutfornumberone.com/technology/sony-dsc-g3-camera-has-wi-fi-and-linux/comment-page-1/#comment-3 Keith Tue, 13 Jan 2009 10:07:11 +0000 http://www.keithrowland.com/blog/?p=170#comment-3 Can we SSH into it? Can we SSH into it?

]]> Comment on Will Facebook Overtake MySpace by Keith http://www.lookingoutfornumberone.com/technology/will-facebook-overtake-myspace/comment-page-1/#comment-2 Keith Tue, 13 Jan 2009 10:06:15 +0000 http://www.keithrowland.com/blog/?p=160#comment-2 I'm thinking that since Facebook is more orderly and the site pages are consistent, that it will overtake MySpace, which is pretty wild and crazy looking at best. I’m thinking that since Facebook is more orderly and the site pages are consistent, that it will overtake MySpace, which is pretty wild and crazy looking at best.

]]>